Enable Mobile Connect; Turn Mobile Connect On Or Off For All Remote Destinations From A Desk Phone; Switch A Desk Phone Call To A Mobile Phone; Switch A Mobile Call To The Desk Phone - Cisco 8811 User Manual

Advanced Calling Features

Enable Mobile Connect

Procedure
Step 1
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 2 Press Select to change the status.

Turn Mobile Connect On or Off for All Remote Destinations from a Desk Phone

Procedure
Step 1 Press Mobility or To Mobile to display the current remote destination status (Enabled or Disabled).
Step 2 Press Select to change the status.

Switch a Desk Phone Call to a Mobile Phone

Procedure
Step 1 Press Mobility.
Step 2 Press Select to send a call to mobile phone.
Step 3
Answer the in-progress call on your mobile phone.
Note

Switch a Mobile Call to the Desk Phone

Procedure
Step 1 Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
Step 2
Press the line on your desk phone to resume the call on your desk phone within 5 to 10 seconds and start
talking on the desk phone.
REVIEW DRAFT - CISCO CONFIDENTIAL
You cannot use the same phone line for any other calls, but if your desk phone supports multiple
lines, you can use another line to make or receive calls.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications Manager
Enable Mobile Connect
11.0
81