Setting Do Not Disturb - Cisco SPA300 Series User Manual

Using Basic Phone Functions

Setting Do Not Disturb

Setting Do Not Disturb

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
• Calls to your personal extensions are forwarded to the specified Call
Forward Busy/No Answer number.
• Intercom calls and pages are blocked.
• Calls to shared extensions, shared lines, and hunt groups may be answered
by other users but will not ring your phone.
You can use star codes for this feature. For more information, see
Codes, page 70. On Cisco SPA301 and SPA501G, this feature is available only
by using the star codes.
Task
Enabling or disabling Do
Not Disturb by using the
softkey
Enabling or disabling Do
Not Disturb by using the
Setup menu
Cisco SPA50xG models
Enabling or disabling Do
Not Disturb by using the
Setup menu
Cisco SPA525G/G2
Instructions
• To enable: Press
indicates that Do Not Disturb is turned on for
your phone.
• To disable: Press
1. Press .
2. Select Preferences.
3. Scroll to Do Not Disturb, and then press
4. Press to select Yes (DND is enabled) or
Y/N
No (DND is disabled).
5. Press , and then press
OK
6. Press to close the menu.
Cancel
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Select Do Not Disturb.
5. Press the right-arrow or left-arrow navigation
button to turn this feature On or Off.
6. Press .
Save
Using Star
. The display screen
Dnd
or .
-Dnd Clr DND
.
Save
2
.
Edit
42