Importing Your Mobile Phone Address Book Into The Cisco Spa 525G2; Making A Mobile Phone Call Using Your Cisco Spa 525G2 - Cisco SPA300 Series User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
STEP 4
NOTE
STEP 1
STEP 2
STEP 3
NOTE
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Scroll to Bluetooth Profiles and press the right-arrow navigation button.
The mobile phone appears in the list of Bluetooth devices.
Importing Your Mobile Phone Address Book into the Cisco
SPA 525G2
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also consult
the latest Cisco SPA 525G2 release notes available at Cisco.com.
To import your mobile phone book into the personal address book on the Cisco
SPA 525G2:
Press or
Dir Directory
Select Personal Address Book.
Press .
Import
Depending on your mobile phone, you may need to authorize the Bluetooth
connection, even if the phone is already paired with the Cisco SPA 525G.
The phone displays a status message about the import. If the import is successful,
your imported contacts appear in the Directory.

Making a Mobile Phone Call Using Your Cisco SPA 525G2

When you make a mobile phone call using your Cisco SPA 525G2, your Cisco SPA
525G2 acts as a handsfree device for your phone. The call is made through your
mobile phone, but the audio is present on the Cisco SPA 525G2 and the call
control is done using the Cisco SPA 525G2, unless you switch back to your mobile
phone. (See "Switching Audio from Your Cisco SPA 525G2 to Your Mobile
Phone" section on page
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also consult
the latest Cisco SPA 525G2 release notes available at Cisco.com.
. Alternatively, press
82.)
and select Directories.
3
80