Entering And Editing Characters - Cisco SPA300 Series User Manual

Getting Started

Entering and Editing Characters

Entering and Editing Characters

NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
If you make a mistake when entering a number, you can edit your entry on the
phone screen. On some screens, you can enter letters as well as numbers.
Not available on Cisco SPA301 or Cisco SPA501G
When entering a number for an outbound call, include the dialing prefix required to
get an outside line, as well any long-distance prefix required for your phone service.
(A dialing prefix is not required for a call placed from a shared phone line.)
Task
Deleting a character
Deleting all characters
Cisco SPA50xG models
Cisco SPA525G/G2
Moving the cursor in a
field
Cisco SPA50xG models
Cisco SPA525G/G2
Changing the mode to
numbers or letters
Cisco SPA50xG models
Instructions
If you make a mistake, press
over the previous number or character.
Press to erase your entry.
Clear
Press , and then select Clear from the
Option
menu.
Press the << softkey to move the cursor to the left,
or press the >> softkey to move the cursor to the
right.
Press the right-arrow navigation button
the cursor to the right or press the left-arrow button
to move the cursor to the left.
Some fields allow you to enter letters and numbers.
If you need to change the mode, use these
softkeys:
• Num: numeric
• Alpha: alphanumeric
Note: You may need to press the right-arrow or left-
arrow button to see these options.
1
to backspace
DelChar
to move
23