Setting Do Not Disturb - Cisco SPA 504g User Manual

Setting Do Not Disturb

Use the Do Not Disturb feature to prevent incoming calls from ringing your phone. If you have voice
mail configured, incoming callers can be immediately routed to voice mail. If voice mail is not
configured, callers will hear a busy signal or a message.
You can also set Do Not Disturb from your PC by using the web configuration utility.
Enabling Do Not Disturb
Do Not Disturb Softkey
To activate Do Not Disturb, press the dnd softkey. The IP phone screen indicates that Do Not Disturb is
turned on for your phone (except on the Cisco SPA501G).
Do Not Disturb by using Setup
To access Do Not Disturb:
STEP 1 Press the Setup button and select Preferences > Do Not Disturb.
STEP 2 Press the edit softkey.
STEP 3 Press y/n and choose y.
STEP 4 Press ok.
STEP 5 Press save.
37