Pppoe - Draytek Vigor2930 Series User Manual

In the Quick Start Wizard, you can configure the router to access the Internet with different
protocol/modes such as PPPoE, PPTP, Static IP or DHCP. The router supports the DSL
WAN interface for Internet access.
2 . 2 . 1 P P P o E
2 . 2 . 1 P P P o E
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE
connection for accessing the Internet. Your service provider will provide you information
about user name, password, and authentication mode.
If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
User Name
Password
Confirm Password
Click Next for viewing summary of such connection.
18
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Retype the password.
Vigor2930 Series User's Guide