Draytek Vigor2930 Series User Manual page 173

Policy
Enable Mac Access Filter
MAC Address Filter
Attribute
Add
Vigor2930 Series User's Guide
Select to enable any one of the following policy.
Activate MAC address filter- Allow to set MAC
address list for accessing Access Point. PCs with MAC
address not listed above cannot access AP. In addition,
selected station with MAC address listed above can be
isolated from LAN by checking Isolate the station from
LAN.
Blocked MAC address filter- Allow to set MAC
address list for denying access AP. However, stations
with MAC address not listed above are allowed to access
AP.
Select to enable the MAC Address filter for wireless
LAN identified with SSID 1 to 4 respectively. All the
clients (expressed by MAC addresses) listed in the box
can be grouped under different wireless LAN. For
example, they can be grouped under SSID 1 and SSID 2
at the same time if you check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Client's MAC Address
address of wireless client.
s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC
address from LAN.
Add a new MAC address into the list.
Manually enter the MAC
-
165