Setting - Draytek Vigor2930 Series User Manual

3 . 1 4 . 2 T R - 0 6 9
3 . 1 4 . 2 T R - 0 6 9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
URL, username and password for the VigorACS server that such device will be connected.
However URL, username and password under CPE client are fixed that users cannot change
The default CPE username and password are "vigor" and "password". You will
it.
need it when you configure VigorACS server.
ACS Server
176
S e t t i n g
S e t t i n g
Such data must be typed according to the ACS (
Configuration Server) you want to link. Please refer
to VigorACS user's manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
Auto
Vigor2930 Series User's Guide