Refresh Seconds
Refresh
Index
IP Address
TX rate (kbps)
RX rate (kbps)
Sessions
Action
Current /Peak/Speed
Vigor2930 Series User's Guide
Use the drop down list to choose the time interval of refreshing
data flow that will be done by the system automatically.
Click this link to refresh this page manually.
Display the number of the data flow.
Display the IP address of the monitored device.
Display the transmission speed of the monitored device.
Display the receiving speed of the monitored device.
Display the session number that you specified in Limit Session
web page.
Block - can prevent specified PC accessing into Internet within 5
minutes.
Unblock – the device with the IP address will be blocked in five
minutes. The remaining time will be shown on the session column.
Current means current transmission rate and receiving rate for
WAN1/WAN.
Peak means the highest peak value detected by the router in data
transmission.
Speed means line speed specified in WAN>>General. If you do
not specify any rate at that page, here will display Auto for instead.
189