Lan - Created By Using Nat - Draytek Vigor2930 Series User Manual

Class Name of Index 3. In this index, he will set reserve bandwidth for 1 VPN tunnel.
10. Click Edit to open a new window.
11. First, check the ACT box. Then click Edit of Local Address to set a worker's subnet
address. Click Edit of Remote Address to set headquarter's subnet address. Leave
other fields and click OK.
4 . 4 L A N – C r e
4 . 4 L A N – C r e
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is 192.168.1.1/255.255.255.0. The
built-in DHCP server is enabled so it assigns every local NATed host an IP address of
192.168.1.x starting from 192.168.1.10.
Vigor2930 Series User's Guide
a t e d b y U s i n g
a t e d b y U s i n g
N A T
N A T
207