Ball Oiler Lubrication - Grizzly G0709 Owner's Manual

ball Oiler Lubrication

When lubricating ball oilers, we recommend using an oil gun with a rubber tip wide enough to seal against
the ball oiler inlet. A good seal allows the gun to build enough hydraulic pressure to flush out contaminants
and deliver oil at the end of long passages. We do not recommend using oil guns with a steel lance tip,
because they do not create a seal and the narrow tip can easily dislodge the ball—resulting in contamina-
tion, insufficient lubrication, and a damaged ball oiler.
figure 83. Change gear ball oilers.
figure 84. Change gear hub ball oiler.
-54-
Model G0709 (Mfg. Since 5/11)