Table of Contents
Advertisement
Lubrication
When lubricating this machine, first clean the
components before lubricating them. This step is
critical because grime and dust build up on lubri-
cated components, which makes them hard to
move. Simply adding more lubricant will not result
in smooth moving parts.
T26685—Moly-D ISO 32 Multi-Function Oil
T26419—Syn-O-Gen Synthetic Grease
T26685
Figure 78. Recommended lubrication products.
Gears
Remove gear cover and apply a dab of NLGI#2 or
equivalent grease to roller gears (see Figure 79).
Rotate rollers several times in both directions to
distribute grease, then wipe away any excess and
re-attach cover.
Figure 79. Example of slip roll gears.
Model G0971 (Mfd. Since 11/23)
T26419
Roller Bushings
Use an oil can to apply a few drops of ISO 32 or
equivalent oil to the brass bushings of the three
rollers on the right side and into the ball oiler on
the top left side (see Figures 80–81). Rotate roll-
ers several times in both directions to distribute
the oil, then wipe away any excess.
Figure 80. Roller bushings and adjustment
knobs/handwheels.
Ball Oiler
(1 of 3)
Figure 81. Ball oiler locations.
-39-
Advertisement
Table of Contents
