Spindle Bore........................................................................................................................................... 1.57 in.

Spindle Taper............................................................................................................................................ MT#5

Number of Spindle Speeds............................................................................................................................... 8

Spindle Speeds......................................................................................................................... 70 – 2000 RPM

Spindle Type................................................................................................................................ D1-5 Camlock

Spindle Bearings................................................................................................................ NSK Tapered Roller

Spindle Length........................................................................................................................................... 17 in.

Spindle Length with 3-Jaw Chuck....................................................................................................... 21-7/8 in.

Spindle Length with 4-Jaw Chuck....................................................................................................... 21-1/4 in.

Spindle Length with Faceplate............................................................................................................ 18-1/2 in.

Tailstock Info

Tailstock Quill Travel......................................................................................................................... 3-15/16 in.

Tailstock Taper.......................................................................................................................................... MT#3

Tailstock Barrel Diameter..................................................................................................................... 1.656 in.

Threading Info

Number of Longitudinal Feeds....................................................................................................................... 24

Range of Longitudinal Feeds...................................................................................... 0.00168 – 0.1175 in./rev.

Number of Cross Feeds................................................................................................................................. 32

Range of Cross Feeds............................................................................................... 0.00046 – 0.03231 in./rev

Number of Inch Threads................................................................................................................................. 42

Range of Inch Threads.................................................................................................................... 4 – 112 TPI

Number of Metric Threads.............................................................................................................................. 44

Range of Metric Threads............................................................................................................... 0.1 – 7.0 mm

Number of Modular Pitches............................................................................................................................ 34

Range of Modular Pitches............................................................................................................ 0.1 – 1.75 MP

Number of Diametral Pitches.......................................................................................................................... 25

Range of Diametral Pitches............................................................................................................ 16 – 112 DP

Dimensions

Bed Width.............................................................................................................................................. 7-3/8 in.

Leadscrew Diameter................................................................................................................................. 7/8 in.

Leadscrew TPI........................................................................................................................................... 8 TPI

Leadscrew Length..................................................................................................................................... 50 in.

Steady Rest Capacity................................................................................................................... 3/8 – 2-3/4 in.

Follow Rest Capacity.................................................................................................................... 3/8 – 2-3/8 in.

Faceplate Size........................................................................................................................................... 11 in.

Feed Rod Diameter.................................................................................................................................. 3/4 in.

Floor to Center Height............................................................................................................................... 45 in.

Construction

Base..................................................................................................................................................... Cast Iron

Headstock............................................................................................................................................ Cast Iron

Headstock Gears............................................................................................................ Flame-Hardened Steel

Bed........................................................................................ Induction-Hardened, Precision-Ground Cast Iron

Body..................................................................................................................................................... Cast Iron

Stand.................................................................................................................................................... Cast Iron

Paint......................................................................................................................................................... Epoxy

Fluid Capacities

Headstock Capacity.................................................................................................................................. 4.2 qt.

Headstock Fluid Type................................................................ ISO 32 (eg. Grizzly T23963, Mobil DTE Light)

Gearbox Capacity..................................................................................................................................... 2.1 qt.

Gearbox Fluid Type...................................................................... ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)

Apron Capacity............................................................................................................................................ 1 qt.

Apron Fluid Type.......................................................................... ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)

Coolant Capacity....................................................................................................................................... 10 qt.

The information contained herein is deemed accurate as of 6/4/2013 and represents our most recent product specifications.

Model G0709

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

Model G0709 (Mfg. Since 5/11)

PAGE 2 OF 3

-5-

Table of Contents