Digital Image Stabilization (Dis); Attaching The Supplied Tripod Adapter - Sharp ViewCam VL-MC500S Operation Manual

Digital Image
Stabilization (DIS)
Available mode:
Tape Camera
The digital image stabilization (DIS) function
allows you to stabilize the image by electroni-
cally compensating for relatively minor image
shaking that is often annoying in close-up
shots.
1
In Tape Camera mode, press the
DISPLAY button until the mode screen
appears.
2
Press l or m on the Operation button
to select "MENU", then press the centre
of the Operation button.
3
Press l or m to select Y, then press
the centre of the Operation button.
4
Press l or m to select "DIS", then
press the centre of the Operation button.
S E T T I N G 2
5
Press l or m to select "ON", then press
the centre of the Operation button.
D I S
6
Press the DISPLAY button to turn off the
menu screen.
• The DIS indicator only appears when the
on-screen indicators are turned on.
To cancel DIS function
Select "OFF" in step 5 above. The z indicator
will disappear.
Notes:
• The DIS function cannot compensate for excessive image
shaking.
• When image shaking does not occur (e.g. when using the
camcorder on a tripod), turn off the DIS function. The picture
will appear more natural when the DIS function is off.
R E C GU I D E
D I S ON
1 6 9 : O F F
A UD I O MOD E
W I N D
R E T U RN
S E L E C T S E T
ON
T A P E
DIS indicator
Attaching the Supplied
Tripod Adapter
Attach the supplied tripod adapter when using
a tripod with the camcorder.
1
Align the tripod adapter with the tripod
adapter socket on the bottom of the
camcorder.
Tripod adapter socket
Tripod adapter
2
Secure the mounting screw, then align a
tripod with the tripod socket on the
bottom of the tripod adapter.
Tripod socket
Mounting screw
3
Attach tripod to tripod socket.
33