Displaying Manual Setting Screen - Sharp ViewCam VL-MC500S Operation Manual

6
Press the DISPLAY button to turn off the
mode screen
• "MF" appears when the on-screen
indicators are turned on.
Manual focus indicator
MF
3 0 min
To return to Auto Focus mode
Press the centre of the Operation button in step
5.
Notes:
• The camcorder may not be able to focus
correctly if the subject is closer than approxi-
mately 1.5 m. Set the zoom control to wide
angle, and try refocusing again.
• If the lens is dirty or fogged, the camcorder may
not be able to focus correctly.
• When "MF" is displayed, you can manually
adjust the focus by pressing j or k, even if the
focus setting screen is not displayed.
Displaying Manual
Setting Screen
Available modes:
Tape Camera, Card Camera
You can manually adjust these settings as
shown below in the manual setting screen.
• White Balance (see page 48)
• Manual Iris (see page 49)
• Manual Gain (see page 50)
• Shutter Speed (see page 51)
Displaying
• The example screens shown are for Tape
Camera mode.
1
In Tape Camera or Card Camera mode,
press the DISPLAY button until the
mode screen appears.
2
Press l or m on the Operation button
to select "MANUAL SET", then press the
centre of the Operation button.
M E NU
S N A P E F F .
S C E N E ME NU
M A NU A L
F U L L A U T O
WH I T E B A L .
I R I S
G A I N
S H U T . S P E E D
R E T U RN
Note:
• Tape Camera and Card Camera mode do not
share manual settings.
S E T E X E C U T E
S E L E C T S E T
MAN U A L S E T
E X E C U T E
A U T O
A U T O
A U T O
A U T O
C H ANG E MOD E A U T O
47