Digital Image Stabilization (Dis) - Sharp VL-ME10E Operating Manual

Useful Features
Camera Recording
Digital Image Stabilization
(DIS)
Available modes: TAPE-CAMERA, DUAL-
CAMERA, CARD-CAMERA
The digital image stabilization (DIS) function is
factory preset to on to stabilize the image by
electronically compensating for relatively minor
image shaking that is often annoying in close-
up shots.
AU TO
6 0min
FADE
Note:
• The DIS function cannot compensate for
excessive image shaking.
Turning Off the DIS Function
When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn off
the DIS function. The picture will appear more
natural when the DIS function is off.
1
Set the camcorder to TAPE-CAMERA,
DUAL-CAMERA or CARD-CAMERA
mode (see page 29).
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select T, then press SET. Select "DIS"
(1), then press SET (2).
MANUAL SE T
SET
a s
1 1 2
a
35
All manuals and user guides at all-guides.com
DIS indicator
GAMMA SRCH SRCH SRCH
MAN. FOCUS
SHU T. SP E ED
E XPOSURE
P I C. E F F E C T
SCE NE MENU
QK. RE TURN
D I S ON
RETURN OFF
SET
s
4
Press f or d to select "OFF", then
press SET.
D I S
5
Press the MENU/DISPLAY button to
turn off the menu screen.
• The z indicator is turned off.
To return to DIS mode
Select "ON" in step 4 above.
OFF