Still Recording On Tape - Sharp ViewCam VL-MC500S Operation Manual

Useful Features
Camera Recording

Still Recording on Tape

Still Recording Effects
Available mode:
Tape Camera
You can select one of these still recording effects
to record the still images with an effect.
Types
PHOTO SHOT: A still picture is recorded
after the sound and visual effects of a
camera shutter closing.
9 FRAMES: A still picture is recorded at
intervals of 1/8 of a second using a 9-
frame picture.
16 FRAMES: A still picture is recorded at
intervals of 1/8 of a second using a 16-
frame picture.
OFF: A still image recorded without any
effect.
Selecting a still recording
effect
1
In Tape Camera mode, press the
DISPLAY button until the mode screen
appears.
2
Press l or m on the Operation button
to select "SNAP EFF.".
GAMMA
F A D E
ME NU
S N A P E F F .
3
Press the centre of the Operation button
until the desired still recording effect
appears.
SNA P E F F.
4
Press the DISPLAY button to turn off the
mode screen.
32
P H O T O S H OT
S E L E C T S E T
9 F RAME S
Using Still Recording
1
Set the camcorder to Tape Camera
mode.
2
Select the still recording effect.
3
In Recording Standby mode,
press the PHOTO button fully.
• A still image of the subject is
displayed.
4
Press the Start/Stop button.
• The still image of the subject
will be recorded.
To pause recording
Press the Start/Stop button.
To cancel the still image
Press the PHOTO button fully.
Notes:
• Still Recording can also be used during
recording by pressing the PHOTO button fully.
• The picture quality in Still Recording function will
be slightly lower than normal pictures.