Audio Dubbing - Sharp ViewCam VL-MC500S Operation Manual

Audio Dubbing

1
Make sure that Multiple Strobe Playback
is set to OFF (see page 44).
2
Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
3
Press m on the Operation button to
pause playback.
4
Press the DISPLAY button until the
mode screen appears.
5
Press l or m to select "AUDIO DUB",
then press the centre of the Operation
button.
• The audio dubbing screen appears.
G AMMA
AU D I O DU B
M E N U
MULTI F R AME
A UD I O D U B
AUD I O AUD I O 1 1
6
Press m to begin audio dubbing. Record
your narration.
To pause audio dubbing
Press l. To resume audio dubbing, press
magain.
To cancel audio dubbing
Press the centre of the Operation button in step
5. The audio dubbing screen disappears.
E X E C U T E
S E L E C T S E T
T C
0 : 0 0 : 0 0 T A P E
+ 2 + 2
S T A R T S T O P
C A N C E L
If you wish to change the
dubbed audio or dub additional
scenes
1
Press the DISPLAY button to turn off the
audio dubbing screen.
2
Repeat steps 1 to 6 above.
Notes:
• It is recommended that you use Audio Dubbing
only with recordings made with this camcorder.
Use of recordings made with other digital video
equipment may result in poor audio quality.
• Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to 16-
bit mode or vice versa. Press m to resume
operation.
• Audio dubbing will automatically stop if a portion
recorded in LP mode or an unrecorded portion
of the tape is encountered.
• You can play back the dubbed audio and the
original audio together or separately (see page
62).
61