Recording With The Self-Timer - Sharp ViewCam VL-MC500S Operation Manual

Digital Still Camera Features
Camera Recording
Recording with the Self-
timer
Available mode:
Card Camera
The self-timer function allows you to record
images after a time-lag of 10 seconds. This is
convenient when you want to record an image
of you and your friends together.
1
In Card Camera mode, press the
DISPLAY button until the mode screen
appears.
2
Press l or m on the Operation button
to select "SELF TIMER", then press the
centre of the Operation button.
G AMMA
S E L F T I ME R
M E N U
S C E N E
AU T O
68
E X E C U T E
ME NU
S E L E C T S E T
C A RD
[ 1 2 8 0 ]
9 1 1 /
NORMAL
C A N C E L
3
Press the PHOTO button to start the
self-timer.
• The self-timer operating indicator flashes
while the timer counts down.
Self-timer operating indicator
AU T O
• The shutter automatically releases after
10 seconds, and a still image of the
subject is recorded.
To cancel the countdown
Press the PHOTO button in step 3.
To cancel the self-timer
Press the centre of the Operation button again
in step 2.
Notes:
• When recording with the self-timer, stabilize the
camcorder in the horizontal plane by attaching it
to a tripod, etc.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 3 to record another
image with the self-timer.
Caution:
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
C A RD
[ 1 2 8 0 ]
9 1 1 /
NORMAL