Deleting All Stored Images - Sharp ViewCam VL-MC500S Operation Manual

Deleting All Stored Images

You can delete all stored images on a card in
one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 71), and then
perform the procedure below.
1
In Card Playback mode, press the
DISPLAY button until the mode screen
appears.
2
Press l or m on the Operation button
to select "DELETE ALL" then press the
centre of the Operation button.
• The DELETE ALL? indicator appears.
F U L L
M E N U
D E L E T E
D E L E T E
D E L E T E A L L ?
S E L E C T
3
Press l or m to select "YES", then
press the centre of the Operation button.
• To cancel the setting, select "NO".
4
Press the DISPLAY button to finish the
setting.
MULTI
ON E
A L L E X E C U T E
S E L E C T S E T
1 2 3
4 5 6
1 0 0 - 0 0 0 1
NO
Y E S
N O RMA L
S E T
DELETE ALL? indicator
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the image
(see page 71).
• If a print order is assigned to delete-protected
images and you perform the procedure above,
the print order will cancel (the protection setting
will not cancel).
• It may take several seconds to delete all images
from the card.
Caution:
• Do not turn the power off while deleting images.
73