Selecting The Audio Playback Mode - Sharp ViewCam VL-MC500S Operation Manual

Advanced Features
Playback
Selecting the Audio
Playback Mode
Available mode:
Tape Playback
You can select any of the following audio
playback modes.
Audio 1+2
• 12-bit recording in stereo (Audio 1 and
Audio 2 channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel
only)
1
Playback a Mini DV cassette with
dubbed audio.
2
Press the DISPLAY button until the
mode screen appears.
3
Press l or m on the Operation button
to select "MENU", then press the centre
of the Operation button.
62
4
Press l or m to select V, then press
the centre of the Operation button.
5
Press l or m to select "AUDIO", then
press the centre of the Operation button.
P L A Y B A C K
P I C .
A U D I O
A N L G D G T L
R E T U RN
6
Press l or m to select the desired
audio playback mode, then press the
centre of the Operation button.
AUD I O
7
Press the DISPLAY button to turn off the
menu screen.
• The selected audio playback mode
indicator only appears when the on-
screen indicators are turned on.
+ 2 + 2
AUD I O AUD I O
1 1
Audio playback mode indicator
Note:
• The audio playback mode indicator, "AUDIO",
displays in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, while a green
indicates 16-bit.
S E T
E F F E C T
+ 2
1
1
2
S E L E C T S E T
+
1 2