Remote Management - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
This chapter describes how to use the management features of your ProSafe Dual Band Wireless-
N Access Point WNDAP350. To access these features, connect to the WNDAP350 as described in
"Logging In Using the Default IP Address" on page
Monitoring or Maintenance headings in the main menu of the browser interface.
This chapter contains the following sections:
1.
"Remote Management
2.
"Remote Console
3.
"Upgrading the Wireless Access Point Software
4.
"Configuration File Management
5.
"Restoring the WNDAP350 to the Factory Default Settings
6.
"Changing the Administrator Password
7.
"Enabling the SysLog Server
8.
"Using Activity Log Information
9.
"Viewing General Summary Information
10.
"Viewing Network Traffic Statistics
11.
"Viewing Available Wireless Station Statistics
12.
"Enabling Rogue AP Detection
13.
"Viewing Rogue AP Statistics
14.
"Packet Capture
Remote Management
Both the SNMP and Remote Console are enabled by default, which allows for remote
management of the WNDAP350 from a client running SNMP management software, as well as
from a secure Telnet console.
2-12. Then select the category under either the
v1.1, November 2009
Chapter 3
Management
3-1
Advertisement
Table of Contents
