NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 6

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware
programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
Industry Canada statements
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 25cm between the radiator & your body.
This device has been designed to operate with an antenna having a maximum gain of 5 dBi Antenna having a higher gain
is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
Caution:
The device for the band 5150-5250 MHz is only for indoor usage to reduce potentail for harmful interference to co-
channel mobile satellite systems.
High power radars are allocated as primary users (meaning they have priority ) of 5250-5350 MHz and 5650-5850 MHz
and these radars could cause interference and/or damage to LE-LAN devices.
Canada ID: 4054A-09200110
Product and Publication Details
Model Number:
Publication Date:
Product Family:
Product Name:
Home or Business Product:
Language:
Publication Part Number:
Publication Version Number:
vi
WNDAP350
November 2009
Wireless Access Point
ProSafe Dual Band Wireless-N Access Point WNDAP350
Business
English
202-10534-01
1.1
v1.1, November 2009