NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 50
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Figure 2-14 RADIUS server settings
3. Enter the following RADIUS Server settings:
•
Authentication Server. This configuration is required for authentication using a RADIUS
Server.The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use, if the Primary RADIUS Server fails.
–
IP Address. The IP address of the RADIUS Server.
–
Port Number. The port number of the RADIUS Server. The default is 1812.
–
Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
•
Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use if the Primary RADIUS Server fails.
–
IP Address. The IP address of the RADIUS Server.
–
Port Number. Port number of the RADIUS Server. The default: 1813
2-30
v1.1, November 2009
Basic Installation and Configuration
Advertisement
Table of Contents
