Front Panel - NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Front Panel
The WNDAP350 front hardware functions are described below.
1
2
Figure 1-1
The following table explains the LED indicators:
Table 1-1. Front Panel LED Indicators
Item
LED
1
PWR/TEST
Off
On
Blink
2
100
Off
Yellow
Green
3
LINK/ACT LAN
Off
Blink
(Green)
Introduction
3
DESCRIPTION
Power Indicator
No power.
Power is on.
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
Ethernet LAN Speed Indicator
Indicates 10 Mbps or no link detected.
Indicates 100 Mbps link detected.
Indicates 1000 Mbps link detected.
Ethernet LAN Link Activity Indicator
Indicates no Ethernet link detected.
Indicates data traffic on the 1000Mbps Ethernet LAN.
v1.1, November 2009
4
5
1-7
Advertisement
Table of Contents
