NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 126

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
| | | |
| | |
| |
| |-ip>
| | |-address
| | |-default-gateway
| | |-dhcp-client
| | |-dns-server
| |
| |-log>
| | |-syslog
| | |-syslog-server-ip
| | |-syslog-server-port
| |
| |-radius>
| | |-accounting-server-primary
| | |-accounting-server-primary-port
| | |-accounting-server-primary-sharedsecret
secret
| | |-accounting-server-secondary
| | |-accounting-server-secondary-port
| | |-accounting-server-secondary-sharedsecret
shared secret
| | |-authentication-server-primary
| | |-authentication-server-primary-port
server shared secret
| | |-authentication-server-primary-sharedsecret
server shared secret
| | |-authentication-server-secondary
| | |-authentication-server-secondary-port
port
| | |-authentication-server-secondary-sharedsecret --secondary authentication
server shared secret
| |
| |-remote>
| | |-ssh-port
| | |-sshd
| | |-telnet
| |
| |-snmp>
| | |-description
| | |-read-community
| | |-snmp-status
| | |-trap-community
| | |-trap-server
| | |-write-community
| |
| |-spanning-tree
C-12
--set host IP
--host IP address
--IP address of default gateway
--enable dhcp client
--IP address of DNS server
--syslog setting
--enable syslog client
--syslog server IP address
--syslog server port number
--primary accounting server
--primary accounting server port
--primary accounting server shared
--secondary accounting server
--secondary accounting server port
--primary authentication server
--primary system accounting
--secondary authentication server
--secondary authentication server
--enable remote access via SSH
--SSH port
--SSH daemon
--enable remote access via Telnet
--SNMP setting
--SNMP system description
--SNMP ReadCommunity
--SNMP status
--SNMP ReadCommunity
--SNMP TrapServer IP address
--SNMP WriteCommunity
--enable spanning tree protocol
v1.1, November 2009
--secondary accounting server
--primary authentication
Command Line Reference