NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point User Manual page 30
Prosafe dual band wireless-n access point
Hide thumbs
Also See for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point:
- Reference manual (138 pages) ,
- Product data (2 pages) ,
- Application note (6 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Configuring Wireless Access
To configure your wireless settings for 11b/bg/ng and 11a/na:
1. From the main menu under Configuration, select Wireless. The Wireless Settings screen
displays, as shown in
2. Enter the wireless settings for your area. See the online help or
page
2-14.
3. Click Apply to save your settings.
Figure 2-7 Basic Wireless Settings for 802.11b/bg/ng
When you have completed the setup steps, you can deploy the WNDAP350 in your network. If
needed, you can now reconfigure the computer you used in step 1 (from the Static IP) back to its
original TCP/IP settings.
Deploying the WNDAP350 wirelss access point
To deploy the WNDAP350 wirelss access point:
2-10
Figure
2-7.
v1.1, November 2009
"Wireless Settings" on
Basic Installation and Configuration
Advertisement
Table of Contents
