NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 98

– Static – The VLAN is user-defined.
– Default – The VLAN is the default VLAN. The default VLAN is enabled by default.
2. Select the VLAN entry.
3. Enter the VLAN ID and VLAN Name in the provided fields in the first row.
4. Click Apply to update the device.
To add a new VLAN:
1. Click Switching > VLAN > Advanced > VLAN Configuration. The Advanced VLAN
Configuration screen displays.
2. Enter the VLAN ID and VLAN Name in the provided fields in the first row.
3. Click Add to update the device.
To remove a VLAN:
1. Click Switching > VLAN > Advanced > VLAN Configuration. The Advanced VLAN
Configuration screen displays.
2. Select the VLAN entry.
3. Click Delete to remove the entry.
VLAN Membership
The VLAN Membership screen contains a table that maps ports to VLANs. Ports are assigned
VLAN membership by toggling through the Port Control settings.
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-17