NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 104

To define Voice VLAN settings:
1. Click Switching > Voice VLAN > Basic > Properties. The Voice VLAN Basic Properties
screen displays:
Figure 4-16
The Voice VLAN Basic Properties screen contains the following fields:
• Voice VLAN Status – Select the Voice VLAN status on the device. The possible field
values are:
– Enable – Enable Voice VLAN on the device.
– Disable – Disable Voice VLAN on the device. This is the default value.
• VoiceVLAN ID – Select the Voice VLAN ID number.
• Class of Service – Select the CoS tag to add to untagged packets received on the voice
VLAN. The possible field values are 0-7, where zero is the lowest priority, and seven is
the highest priority.
• Remark CoS – Enable or disable reassigning the CoS tag value to packets received on the
voice VLAN. The possible field values are:
– Disable – Disable remarking the packet CoS tag value. This is the default value.
– Enable – Enable remarking the packet CoS tag value.
• Voice VLAN Aging Time – Enter the Voice VLAN aging time. The Voice VLAN aging
time sets the maximum inactivity time for a Voice VLAN port member after its MAC
address is aged out. If the time since the last MAC address with telephony MAC address
was aged out exceeds the Voice VLAN aging time, the port is dropped from the voice
VLAN. The default time is one day. The field format is Day, Hour, Minute. The aging time
starts after the MAC Address is aged out from the Dynamic MAC Address table. The
default time is 300 sec. For more information on defining MAC address age out time, see
"Dynamic Addresses".
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-23