NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 143

GS700AT Series Smart Switch Software Administration Manual
• Restore Defaults– Restore the DSCP Mapping device factory default values. The possible
field values are:
– Checked – Restore the factory default settings for DSCP mapping values.
– Unchecked – Maintain the current DSCP mapping settings.
2. Select the Queue values for each DSCP In value in the provided fields.
3. Check or uncheck the Restore Defaults box in the provided field.
4. Click Apply to update the device.
5-10
v1.0, March 2008
Configuring QoS