NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 124

3. Select the Status and Auto Learn status from the lists in the provided fields in the first row.
4. Enter the Host, MRouter and Leave Timeouts in the provided fields in the first row.
5. Click Apply to update the device.
Multicast Group Configuration
The Multicast Group Configuration screen allows you to create, delete and modify Multicast
service groups. The Multicast Group Configuration table can contain up to 32 Multicast service
groups.
To configure Multicast groups:
1. Click Switching > Multicast > Advanced > Multicast Group Configuration. The Multicast
Group Configuration screen displays:
Figure 4-27
The Multicast Group Configuration screen contains the following information:
• VLAN ID – Displays the VLAN ID.
• VLAN Name – Displays the user-defined VLAN name.
• Multicast Address – Enter the Multicast group MAC Address associated with the VLAN.
• Type – Indicates the VLAN ID status in relation to the Multicast group.
– Static – Attaches the VLAN ID to the Multicast group as static member.
– Dynamic – Dynamically joins the VLAN ID to the Multicast group.
2. Select the group entry.
3. Enter the Multicast Address in the provided field in the first row.
4. Click Apply to update the device.
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-43