NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 206

This appendix provides default settings for the NETGEAR Model GS700AT Series Smart Switch.
You can always configure the switch to default settings by using the Factory Reset function from a
Web browser.
Table A-1. Default Settings
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
GS700AT Series Default Setting
Auto-negotiation
Auto-negotiation
Disabled
Disabled
DHCP enabled
password
802.1q based VLAN
Disabled
Optimized for flow control, all ports set normal priority
v1.0, March 2008
Appendix A
Default Settings
A-1