NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 88

LAG Membership
The Basic LAG Membership screen allows network managers to assign ports to LAGs.
To assign ports to LAGs:
1. Click Switching > LAG > Basic > LAG Membership. The Basic LAG Membership screen
displays:
Figure 4-3
The Basic LAG Membership screen contains the following fields:
• LAG ID – Select the LAG ID.
• LAG Name – Displays the user-defined LAG name.
• LAG Type – Select the LAG type. The possible field values are:
– Static – The LAG is configured manually.
– LACP – The LAG is configured dynamically.
2. Select the LAG ID and LAG Type.
3. Click on the gold button. The port panel displays.
4. Select the ports to be members of the LAG.
5. Click Apply to update the device.
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-7