NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 59

GS700AT Series Smart Switch Software Administration Manual
6. Enter the UDP Port in the provided field in the first row.
7. Select the Filter Name from the list in the provided field in the first row.
8. Enter the Timeout and Retries in the provided fields in the first row.
9. Click Add to update the device.
To remove a trap:
1. Click System > SNMP > SNMPv3 > Trap Configuration. The SNMPv3 Trap Configuration
screen displays.
2. Select the trap entry.
3. Click Delete to remove the entry.
Trap Filter Name
The SNMPv3 Trap Filter Name screen permits filtering traps based on OIDs. Each OID is linked
to a device feature or a portion of a feature. The SNMPv3 Trap Filter Name screen also allows
network managers to filter notifications.
To define the SNMPv3 Trap Filter Name:
1. Click System > SNMP > SNMPv3 > Trap Filter Name. The SNMPv3 Trap Filter Name
screen displays:
Figure 3-16
The SNMPv3 Trap Filter Name screen contains the following field:
• Filter Name – Enter the user-defined notification filter name.
2. Select the trap filter entry.
3-24
v1.0, March 2008
Managing System Settings