NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 34

3. Click OK. The screen displays a table of all interfaces.
To display the LAG table:
1. Click LAGS in the interface selection row. The screen displays a table of all LAGs.
Figure 2-16
To select an interface:
1. Enter the number of the interface in the GO TO INTERFACE box.
2. Click GO to select the interface, as in the following example.
Figure 2-17
Introduction to the Web Browser Interface
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
2-11