Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Software
  5. GS700AT Series
  6. Administration manual

NETGEAR GS700AT Administration Manual

Smart switch software
Hide thumbs Also See for GS700AT:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Software Administration Manual
The NETGEAR ® GS700AT Smart Switch Software Administration Manual describes how to
install, configure, operate, and troubleshoot the GS700AT Gigabit Smart Switch using its included
software. This book describes the software configuration procedures and explains the options
available within those procedures.

Who Should Use this Book

The information in this manual is intended for readers with intermediate to advanced system
management skills.
This document was created primarily for the system administrator who wishes to install and
configure the GS700AT Smart Switch in a network. This user guide assumes that the reader has a
general understanding of switch platforms and a basic knowledge of Ethernet and networking
concepts. To install this switch, it is not necessary to understand and use all of its capabilities.
Once basic configuration is performed, the switch operates using the remaining factory default
parameters. However, a greater level of configuration—anywhere from the basic up to the
maximum possible—will allow your network the full benefit of the switch's features. The web
interface simplifies this configuration at all levels.

How to Use This Book

This document describes configuration commands for the GS700AT Smart Switch software. The
commands can all be accessed from the Web interface.
•
Chapter 1, "Getting Started with Switch Management"
Discovery utility to set up your switch so that you can communicate with it.
•
Chapter 2, "Introduction to the Web Browser Interface"
•
Chapter 3, "Managing System Settings"
•
Chapter 4, "Configuring Switching Settings"
functions.
•
Chapter 5, "Configuring QoS"
describes how to configure the System functions.
describes how to configure the Switching
describes how to configure QoS functions.
v1.0, October 2008

About This Manual

describes how to use the Smart Wizard
introduces the Web browser interface.
viii

Advertisement

loading

Related Manuals for NETGEAR GS700AT

Summary of Contents for NETGEAR GS700AT

  • Page 1: About This Manual

    This document was created primarily for the system administrator who wishes to install and configure the GS700AT Smart Switch in a network. This user guide assumes that the reader has a general understanding of switch platforms and a basic knowledge of Ethernet and networking concepts.
  • Page 2 • Appendix A, “Default Settings” feature values. Note: Refer to the product release notes for the GS700AT Smart Switch Software application level code. The release notes detail the platform specific functionality of the Switching, SNMP, Config, and Management packages. Conventions, Formats, and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: •...

  • Page 3: How To Use This Manual

    Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. • Scope. This manual is written for the GS700AT Smart Switch according to these specifications: Product Version Manual Publication Date Note: Product updates are available on the NETGEAR, Inc.

  • Page 4: How To Print This Manual

    GS700AT Smart Switch Software Administration Manual How to Print this Manual To print this manual, select one of the following options: • Printing a Page from HTML. Each page in the HTML version of the manual is dedicated to a major topic. Select File > Print from the browser menu to print the page contents.