Table of Contents
Advertisement
Chapter 5
Installing the IDS-4235 and IDS-4250
To install the center-mount brackets, follow these steps:
Locate the right slide assembly and push the back bracket toward the back of the
Step 1
slide assembly (see
Position the right slide assembly in the two-post rack at the location you marked,
Step 2
push the back bracket forward against the vertical two-post rack, and secure the
front and rear center-mounting brackets to the rack with two 12-24 x 0.5-inch
pan-head Phillips screws
Repeat Steps 1 and 2 to install the left side assembly in the rack.
Step 3
Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1
78-15597-02
Figure 5-12 on page
5-38).
(Figure 5-12 on page
Installing the Accessories
5-38).
5-37
Advertisement
Table of Contents
Troubleshooting
