Cisco CSS 11501 - Content Services Switch Getting Started Manual page 56

Creating Usernames and Passwords
•
Figure 2-1
Figure 2-1
NWBNNNR
Script directory, set to None (no directory access)
For example, to define directory access for username picard, enter:
(config)# username picard password "captain" superuser NWBNNNR
To display a list of existing usernames, enter:
(config)# username ?
To remove an existing username, enter:
(config)# no username picard
To change a user password, reenter the username command and specify the new
password. Remember to include SuperUser privileges if required. For example:
(config)# username picard password "flute" superuser
The no username command removes a user permanently. Make sure you want to
Caution
perform this action because you cannot undo this command.
Cisco Content Services Switch Getting Started Guide
2-8
access - Specifies directory access privileges for the username. By default,
users have both read- and write-access privileges (B) to all seven directories.
Enter, in order, one of the following access privilege codes for each of the
seven CSS directories:
R - Read-only access to the CSS directory
–
W - Write-only access to the CSS directory
–
B - Both read- and write-access privileges to the CSS directory
–
N - No access privileges to the CSS directory
–
illustrates the directory access privileges for a username.
CSS Directory Access Privileges
MIBs directory, set to read-only access
Core directory, set to None (no directory access)
Release Root directory, set to None (no directory access)
Archive directory, set to None (no directory access)
Root directory, set to both read and write-access
Log directory, set to write-only access
Chapter 2 Configuring CSS Basics
OL-6037-01