Table of Contents
Advertisement
Quick Links
Cisco Edge 300 Series Switch Installation Guide
•
•
•
•
•
•
•
•
•
•
•
About this Guide
This guide describes how to install the Cisco Edge 300 series switch on a wall or desktop and describes
the LEDs and ports.
For configuration information, see the Cisco Edge 300 series switch documentation on Cisco.com. For
system requirements, important notes, limitations, open and resolved bugs, and documentation updates,
see the release notes on Cisco.com.
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
About this Guide, page 1
Box Contents, page 2
Overview, page 3
Installing the Switch, page 6
Powering on the Switch, page 15
Resetting to Factory Mode, page 15
Technical Specifications, page 15
Regulatory Standards Compliance, page 16
EMC Class A Notices and Warnings, page 17
Advertisement
Table of Contents
Related Manuals for Cisco Edge 300 Series
Summary of Contents for Cisco Edge 300 Series
-
Page 1: Table Of Contents
• About this Guide This guide describes how to install the Cisco Edge 300 series switch on a wall or desktop and describes the LEDs and ports. For configuration information, see the Cisco Edge 300 series switch documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and documentation updates, see the release notes on Cisco.com. -
Page 2: Box Contents
1. These parts are included in the wall-mount kit (ACC-E300-WALL). 2. These parts are included in the desktop kit (ACC-E300-DESK). Verify that you have received these items. If any item is missing or damaged, contact your Cisco Note representative or reseller. -
Page 3: Overview
Overview Table 1 Cisco Edge 300 Series Models Model Description CS-E300-AP-K9 Cisco Edge 300 series switch with WiFi and Bluetooth CS-E300-K9 Cisco Edge 300 series switch HS-E300-AP-K9 HSJC/Cisco Edge 300 series switch with WiFi and Bluetooth HS-E300-K9 HSJC/Cisco Edge 300 series switch 1. -
Page 4: Port Descriptions
The Gigabit Ethernet uplink port provides a 10/100/1000 Mb/s connection to a Catalyst 2000 or Catalyst 3000 series switch. Ethernet The Fast Ethernet ports provide 10/100 Mb/s connections to computers or other devices. Cisco Edge 300 Series Switch Installation Guide OL-24909-02... - Page 5 Supports Human Interaction Design Protocol (HIDP) for remote control or input devices. LEDs Figure 4 Cisco Edge 300 Series Switch LEDs Ethernet downlink Bluetooth Gigabit Ethernet uplink Power WiFi 1. Only CS-E300-AP-K9 and HS-E300-AP-K9. Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
-
Page 6: Installing The Switch
You can also install the switch in a ventilated cabinet using the wall-mount or desktop bracket. Equipment That You Need Phillips screwdriver • Scratch awl or other sharp pointed object (wall-mount) • Electric drill with a 6-mm drill bit (wall-mount) • Cisco Edge 300 Series Switch Installation Guide OL-24909-02... -
Page 7: Before You Begin
7.9 inches (20 cm) or more from the body of all persons. Statement 332 Statement 1005 Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A Statement 1005 Cisco Edge 300 Series Switch Installation Guide OL-24909-02... - Page 8 Be aware of the size and weight of the switch when mounting. Ensure that the mounting location has a Caution stable flat surface and can safely support the weight of the switch. Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
-
Page 9: Installing The Switch On A Wall
You can mount the switch horizontally or vertically on a wall. The wall-mount bracket has four slots (in two pairs) on its bottom panel (see Figure Note Figure 5 Bracket Slot Distances for Wall-Mounting 4.17 inches (106 mm) 6.02 inches (153 mm) Cisco Edge 300 Series Switch Installation Guide OL-24909-02... - Page 10 M3.0 x 6mm Phillips pan head screws Step 2 Connect all the cables that are necessary for your installation. Slide the power cord retainer along the power cord, and snap it into the chassis (see Figure Step 3 Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
- Page 11 Determine where you want to mount the switch and its orientation. Make sure that the wall is smooth, flat, dry, and sturdy. Make sure that the location is within reach of an electrical outlet. Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
- Page 12 Use the two M3.0 x 6-mm Phillips pan head screws to attach the desktop bracket to the bottom of the Step 1 switch (see Figure Figure 9 Attaching the Desktop Bracket M3.0 x 6mm Phillips pan head screws Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
- Page 13 Use the supplied cable tie to secure the cables to the bracket (see Figure 11). Step 4 Figure 11 Routing the Cables — Desktop Place the switch on a desk or table. Step 5 Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
- Page 14 Figure 12 Cabinet Dimensions 11.81 x 5.91 inches (30 x 15 cm) 19.69 inches (50 cm) 12.60 x 3.54 inches (32 x 9 cm) 19.69 inches (50 cm) 15.75 inches (40 cm) Cisco Edge 300 Series Switch Installation Guide OL-24909-02...
-
Page 15: Powering On The Switch
To reboot the Cisco Edge 300 to factory mode and force an image upgrade through the Smart Install network, press and hold the Reset button for more than 5 seconds. If the Cisco Edge 300 is unable to connect to the Smart Install director, you can use the Cisco Edge USB Note SmartInstall tool to upgrade or restore the system firmware using a USB flash drive. -
Page 16: Regulatory Standards Compliance
Regulatory Standards Compliance Regulatory Standards Compliance This section includes all regulatory, safety, and EMC standards. Table 4 Regulatory Standards Compliance for the Cisco Edge 300 Series Switch Specification Description Safety IEC 60950-1 Second Edition EN 60950-1 Second Edition GB4943 2001... -
Page 17: Emc Class A Notices And Warnings
This Device Meets International Guidelines for Exposure to Radio Waves The Cisco Edge 300 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. - Page 18 This Device Meets FCC Guidelines for Exposure to Radio Waves The Cisco Edge 300 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 1.1310.
-
Page 19: Obtaining Documentation And Submitting A Service Request
Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html... - Page 20 Obtaining Documentation and Submitting a Service Request Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.