Shutting Down The Css - Cisco CSS 11501 - Content Services Switch Getting Started Manual

Shutting Down the CSS

Note
Shutting Down the CSS
Note
Cisco Content Services Switch Getting Started Guide
1-24
The CSS has a reboot alias that allows you to reboot it from any mode except User
mode. When you enter the reboot alias, the CSS changes the current mode to Boot
mode and then executes the reboot command.
You must enter the entire reboot alias name to execute it. The CSS does not
automatically complete the reboot alias at the command line when you enter only
part of its name. For example, if you enter reb in global configuration mode, the
CSS displays an invalid command message.
Use the shutdown command to shut down the CSS. This command shuts down all
CSS processes so you can power cycle the unit safely. The shutdown command
is available in Boot mode.
To shut down the CSS, access Boot mode and enter:
(config-boot)# shutdown
The CSS displays a prompt to verify that you want to shut it down:
Are you sure you want to shutdown the system, [y/n]:
Enter y to shut down the CSS.
The CSS has a shutdown alias that allows you to shut it down from any mode
except User mode. When you enter the shutdown alias, the CSS changes the
current mode to Boot mode and then executes the shutdown command.
You must enter the entire shutdown alias name to execute it. The CSS does not
automatically complete the shutdown alias at the command line when you enter
only part of its name. For example, if you enter shutd in global configuration
mode, the CSS displays an invalid command message.
Chapter 1 Booting, Logging In, and Getting Started
OL-6037-01