Chapter 2 Configuring Cs Basic; Initial Setup Quick Start; Table 2-1 Initial Setup Quick Start - Cisco CSS 11501 - Content Services Switch Getting Started Manual

Initial Setup Quick Start

Initial Setup Quick Start
Cisco Content Services Switch Getting Started Guide
2-2
Table 2-1 is a quick start configuration table designed to help you configure the
CSS quickly and easily. This table provides the following basic steps:
Log in and access config mode
•
Change the default administrative username and password
•
Create additional usernames and passwords to log in to the CSS (optional)
•
Access boot mode to configure an IP address and subnet mask for the
•
Ethernet management port
Configure a static route for destination networks that are outside the local
•
subnet of the CSS and the Ethernet management port (optional)
Configure a default IP route
•
Enter the date, time, and time zone (optional)
•
Specify a Simple Network Time Protocol (SNTP) server (optional)
•
Once you configure the Ethernet management port IP address, you can continue
to use the console port or you can use the Ethernet management port to Telnet in
to the CSS and configure it remotely.
Table 2-1 Initial Setup Quick Start
Task and Command Example
Log in to the CSS using the default administrative username admin and
1.
password system, or the username and password assigned to you during the
boot process.
Refer to Chapter 1, Booting, Logging In, and Getting
logging in to the CSS.
2. Access config mode.
# config
(config)#
Change the default administrative username and password.
3.
(config)# username-offdm bobo password secret
Chapter 2 Configuring CSS Basics
Started, for details on
OL-6037-01