Chapter 1
Booting, Logging In, and Getting Started
Rebooting the CSS
OL-6037-01
!***************** OWNER *****************
owner Transparent_Owner
content Transparent_Rule
add service Transparent_Cache1
port 80
protocol tcp
url "/*" eql Cacheable or url "/*"
balance domain
failover bypass
application http
active
##########################################
##
Setup Completed Successfully!!!
##########################################
Use the reboot command to reboot the CSS. This command is available in Boot
mode.
Before you enter the reboot command, save an existing running-config file prior
to rebooting the CSS by using the copy running-config startup-config command
from SuperUser mode. If you are not in expert mode, the CSS displays the
prompts to save profile and configuration changes before it reboots.
To reboot the CSS, access Boot mode and enter the reboot command. For
example, enter:
(config)# boot
(config-boot)# reboot
The CSS displays a prompt to verify that you want to reboot it:
Are you sure you want to reboot the system, [y/n]
Enter y to reboot the CSS.
Cisco Content Services Switch Getting Started Guide
Rebooting the CSS
##
1-23