Control Panel Messages - Breville BB420 Instruction And Recipe Book

Control Panel
Messages

Control Panel Messages

– Error Detection
When the Start/Pause button has been pressed to
begin the baking process and there is a problem
relating to the sensor, the machine will beep and
flash the particular error message specific to the
problem. There are 5 different messages.
Error Message
Error Message
If the error messages
Display Window contact your nearest authorised
Breville Service Centre. (Refer to Page 73 for details.)
27 Control Panel Messages
Problem
If attempting to use the bread
machine shortly after a previous
loaf has been baked, its interior
will still be warm, i.e. the sensor
temperature will still be above
40 o C.
Problem
If the bread machine is used in a
very cold environment, the yeast
will not activate correctly.
appear in the
Correction
Press Stop to reset. Open the lid
and remove the bread pan to
cool. Always allow the bread
machine sufficient time to cool
before using again.
Correction
Use the bread machine in a
warmer environment.
Recommended room
temperature is 20-25°C.
Press Stop to reset.