Control Panel Messages - Breville BB280 Instructions For Use And Recipe Book

CONTROL PANEL MESSAGES

CONTROL PANEL MESSAGES – ERROR DETECTION
When the Start button is pressed to begin the program and there is a problem relating to the
sensor, the bread machine will beep twice and then flash an error message specific to the
problem.
There are 4 different messages.
ERROR MESSAGE PROBLEM
E01 If attempting to use
the bread machine
shortly after a loaf
has been baked, its
interior will still be
warm, i.e. the sensor
temperature will still
be above 40ºC.
E00 The ambient temperature
is too cold.
If the error messages EEE or HHH appear in the Display Window contact your nearest
authorized Breville Service Centre (Refer Page 33).
26
CORRECTION
Press Stop to reset.
Open the lid and remove
the bread pan to cool.
Always allow the bread
machine sufficient time
to cool before using again.
Ensure the room temperature
is above 10°C.
27