Manager Operation
3-3-15. Customer busy reset
3-3-16. Sound
R-106
This command is used to release the busy flag of the customer used by other dead terminal.
Executing this command always releases this flag, so please be careful to perform this
operation.
↑
This command is used to play the programmed sound file or to record to the sound file.
↑
↓
↓
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "15. Customer Busy Reset" and press the <YES> key.
4. Enter the appropriate customer number, and then select
"YES" to execute this command.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "16. Recording" and press the <YES> key.
4. Enter the appropriate sound file, press <YES> to play, press
<NO> to record.
RECEIPT