Table of Contents
Advertisement
Read and Reset
Employee report (daily)
Employee report (weekly / bi-weekly)
R-174
— Mode / Report code / Report title / Z counter (Z only)
— Employee No. / Employee character / Social Security No.
— Day of the week / Date
— Shift 1: Clock-in / Clock-out / Break / Job code / Tip / Work time
— Shift 2: Clock-out shift *1
— Shift 3: Clock-in shift *2
— Break total / Tip total / Work time total *3
— Job summary / Job code / Work time *4
— Job summary *5
— Regular work hours *6
— Overtime work hours *6
— Total of work hours *6 / Pay
*1 If employee is not clocked-out the shift, then "**:**" is printed on OUT & WORK.
*2 If employee is not clocked-in the shift, then "**:**-**:**" is printed on IN&OUT.
*3 If employee is not clocked-out the shift yet, then "**:**" is printed on WORK.
*4 JOB summary is printed in order to clock-in the shift.
If there is the same JOB code, then it will add to the JOB that was found before.
*5 If employee is not clocked-out the shift, then "**:**" is printed. No JOB # is printed, if
employee is not clocked-in the shift.
*6 You can select HH:MM format or HH.mm (print minutes in fraction) format.
— Mode / Report code / Report title / Z counter (Z only)
— Day of the week / Date
— Shift 1
— Shift 2
— Shift 3
— Job summary
— Regular work hours
— Overtime work hours
— Total of work hours/ Pay
*1 If all shift in one day of the week is zero (no data), then that day of the week is not printed on
the report.
Advertisement
Table of Contents
