Application System
2-10-2-4. Clock-in operation (4)
Program:
Operation
Receipt sample
R-64
Display job code window = YES
Allow to clock-in with non-preset job code = YES
(Refer to the page 62 of the programming manual.)
→ All job codes that are programmed in job code file are displayed.
If you want to change these special characters, refer to the page 134 of the programming
manual.
1. XXXXXX <CLOCK-IN>
2. Choose the appropriate Job Code from the CLOCK-IN menu,
and press the <YES> key to register the start of working
hours.
XXXXXX
Employee No.
— Header
— Employee character (16 digits)
— Special character (REC #29), time
— Special character (REC #33), job character