Performing A Full Reset (Initialization - Casio DT-X10 Series User Manual

Performing a Full Reset (Initialization)

Performing a full reset initializes memory. This means that all data stored in memory
(RAM) is deleted and all Handheld Terminal settings are returned to their initial factory
defaults.
Perform a full reset whenever any one of the following conditions exists.
• When you want to delete all memory contents and return Handheld Terminal settings
to their initial factory defaults
• When you are no longer able to use the Handheld Terminal because you forgot your
password
• When the Handheld Terminal does not operate normally due to a memory problem
• When the message "XXXXX" appears
To perform a full reset
Important !
Performing a full reset deletes all data currently stored in memory (RAM). If
possible, backup Handheld Terminal to a computer, Flash Memory, a memory
card, or some other medium before performing a full reset.
1. While the Handheld Terminal is turned on, hold down the power key as you use the
stylus to hold down the reset button for about one second, until the message shown
below appears on the display.
2. Press the right Trigger key. This causes the message shown below to appear.
3. Press the right Trigger key again.
• This performs the full reset and deletes all data in memory (RAM).
• Press the right Trigger key again. This will cause the startup screen to appear.
E-32