System Command Execution; X/Z Reporting - Casio QT 6600 - 64 MB RAM Reference Manual

Manager Operation

3-4. System command execution

3-4-1. X/Z reporting

X/Z command execution
Meaning of the command data (Scanning/ not found PLU)
R-114
System command functions are provided to perform nonregistration operations, such as
collection / consolidation system control, backup / restore operation of files in the
terminals, and remote power on / off control.
This chapter shows the X/Z code system for your reference.
1. Issuing flash report
X/Z mode → <X> or <X/FOR>, <XX>, <XXX>, <X/KETTEN>
2. Issuing other reports
X/Z mode → D
D D D
7 6 5 4
Digit Value
D 0 Always
7
D 0 Always
6
0 Scanning PLU or Not found PLU report
1 Scanning PLU or Not found PLU sales by group/ department/ subdepartment report
2 Scanning PLU or Not found PLU stock by group/ department/ subdepartment report
D 3 Scanning PLU or Not found PLU out of stock by group/ department/ subdepartment report
5
4 Scanning PLU or Not found PLU best 50 amount by group/ department/ subdepartment report
5 Scanning PLU or Not found PLU best 50 quantity by group/ department/ subdepartment report
6 Scanning PLU or Not found PLU 0 sales by group/ department/ subdepartment report
7 Scanning PLU or Not found PLU inactive by group/ department/ subdepartment report
0 Execution in X mode
D 1 Execution in Z mode
4
2 Edit employee data
D 0 Always
3
26 Scanning PLU
D D
2 1 27 Not found PLU
D D D <#-1>
3 2 1
Meaning