3-3-2. Remote on
3-3-3. Remote off
QT-6600 Reference Manual
This command is used to power on the terminals connected with the same inline.
↓
This command is used to power off the terminals connected with the same inline.
↓
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "2. Remote On" and press the <YES> key.
4. Select all terminals or individual terminal, select "YES" to
execute this command.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "3. Remote Off" and press the <YES> key.
4. Select all terminals or individual terminal, select "YES" to
execute this command.
R-95